Forwa Liquid PTFE Thread Sealant
A single-component, anaerobic liquid. When threads engage, air is excluded and the sealant cures into a tough, plastic-like solid that fills every void—permanently. Forwa nails the problems traditional tape can’t:
Forwa Liquid PTFE Thread Sealant
Sub-headline: Odd threads? Live leak? Metal corrosion? Brush it on—seal it for life!
Sub-headline: Odd threads? Live leak? Metal corrosion? Brush it on—seal it for life!
Traditional PTFE tape works—until it meets these nightmares:
Pain Point 1 – Damaged or non-standard threads
Worn, scratched or mismatched threads? Tape can’t grip, so drips never stop.
Worn, scratched or mismatched threads? Tape can’t grip, so drips never stop.
Pain Point 2 – Micro-leaks in already-assembled joints
A pin-hole seep means draining the system, re-wrapping, re-testing…costly downtime.
A pin-hole seep means draining the system, re-wrapping, re-testing…costly downtime.
Pain Point 3 – Need an instant seal or live-leak fix
You can’t shut the line for hours. Tape unravels under pressure.
You can’t shut the line for hours. Tape unravels under pressure.
Pain Point 4 – Threads rust & seize
Moisture and air attack bare metal—next time you can’t unscrew without snapping bolts.
Moisture and air attack bare metal—next time you can’t unscrew without snapping bolts.
Pain Point 5 – Demands bullet-proof reliability
High-pressure, high-vibration, safety-critical joints—tape may creep and fail.
High-pressure, high-vibration, safety-critical joints—tape may creep and fail.
Meet Forwa Liquid PTFE Thread Sealant
A single-component, anaerobic liquid. When threads engage, air is excluded and the sealant cures into a tough, plastic-like solid that fills every void—permanently.
A single-component, anaerobic liquid. When threads engage, air is excluded and the sealant cures into a tough, plastic-like solid that fills every void—permanently.
Forwa nails the problems traditional tape can’t:
Gap-filling superpower
Liquid flows into gouges, dents and odd profiles, then hardens for a void-free, zero-leak seal.
Liquid flows into gouges, dents and odd profiles, then hardens for a void-free, zero-leak seal.
Fast cure & live-leak repair
Most grades skin-over in minutes and seal under light residual pressure—ideal for emergency fixes without full disassembly.
Most grades skin-over in minutes and seal under light residual pressure—ideal for emergency fixes without full disassembly.
Permanent, vibration-proof bond
Once cured it locks threads like a solid bushing, resists vibration, thermal cycling and pressure spikes far beyond tape limits.
Once cured it locks threads like a solid bushing, resists vibration, thermal cycling and pressure spikes far beyond tape limits.
Built-in corrosion shield
The cured layer blocks water, air and chemicals, keeping threads rust-free and future removal easy.
The cured layer blocks water, air and chemicals, keeping threads rust-free and future removal easy.
Fool-proof application
No wrap counting, no over-tightening. Clean threads, brush on (cover 2/3 of male thread), assemble—done.
No wrap counting, no over-tightening. Clean threads, brush on (cover 2/3 of male thread), assemble—done.
Where it shines (tape’s worst battlefields)
• High-pressure water, gas, hydraulics, oil-field lines
• Restoring damaged or non-standard threads
• Live micro-leak repairs
• Automotive, marine, heavy-equipment vibration zones
• Permanent, rust-proof seals for HVAC manifolds, lab instruments, mini-fittings
• High-pressure water, gas, hydraulics, oil-field lines
• Restoring damaged or non-standard threads
• Live micro-leak repairs
• Automotive, marine, heavy-equipment vibration zones
• Permanent, rust-proof seals for HVAC manifolds, lab instruments, mini-fittings
Why Forwa?
• Extreme pressure rating—tested drip-tight & bubble-tight.
• Three cure strengths: Low (removable), Medium (general), High (permanent lock).
• Temperature range: –55 °C to +150 °C (special grades to +200 °C).
• Chemical-proof to oils, fuels, acids, alkalis.
• Certified: ISO, SEDEX, WRAS, NSF/ANSI 61 (potable water), RoHS & REACH compliant.
• Extreme pressure rating—tested drip-tight & bubble-tight.
• Three cure strengths: Low (removable), Medium (general), High (permanent lock).
• Temperature range: –55 °C to +150 °C (special grades to +200 °C).
• Chemical-proof to oils, fuels, acids, alkalis.
• Certified: ISO, SEDEX, WRAS, NSF/ANSI 61 (potable water), RoHS & REACH compliant.
Upgrade your sealing game
When PTFE tape gives up, KingSeal Liquid PTFE steps in—stronger, smarter, forever.
When PTFE tape gives up, KingSeal Liquid PTFE steps in—stronger, smarter, forever.
Buy the grade that matches your pressure, temperature and certification needs and say goodbye to callbacks.
PREVIOUS:
NEXT:
No. 168, Qingdong Road, Dongcheng Street, Sihui City, Guangdong Province, China.
